Artilliste
artikelliste blättern
ich poste das mal hier damit man es mal leichter findet...
zum thema artikelliste blättern und das es manchmal nicht korrekt funktioniert bzw. die url / uris immer länger werden....
-> http://contenido.org/forum/viewtopic.php?p=51518#51518
zum thema artikelliste blättern und das es manchmal nicht korrekt funktioniert bzw. die url / uris immer länger werden....
-> http://contenido.org/forum/viewtopic.php?p=51518#51518
*** make your own tools (wishlist :: thx)
aktuellste Version
hallo alle mitenander,
ich blicke bei den ganzen Antworten und fragen jetzt gar nicht mehgr genu durch, welches die aktuellste, funktionierende Lösung ist.
Kann die nochmal jamnd posten?
Also das komplette Modul bitte...
Vielen Dank,
Jeannette
ich blicke bei den ganzen Antworten und fragen jetzt gar nicht mehgr genu durch, welches die aktuellste, funktionierende Lösung ist.
Kann die nochmal jamnd posten?
Also das komplette Modul bitte...
Vielen Dank,
Jeannette
Die von Herrn B. (siehe die B'sche Signatur) kannst Du nehmen. Ich wundere mich höchst energisch, wieso 4fb einunddreißig Jahre braucht, um ein Verzeichnis der gültigen Module anzubieten. Herrgottnochmal, hat den niemand ein Einsehen? Müssen alle erst zu cmsmadesimple oder Snode wechseln?
"Die Module spielen verrückt" heisst nicht ohne Grund ein Smasher auch den Achtz'gern!
"Die Module spielen verrückt" heisst nicht ohne Grund ein Smasher auch den Achtz'gern!
Ich verzweifel gerade. Ich habe jetzt die verschiedenen Versionen ausprobiert, aber so richtig klappt es nie.
Kann mal jemand kurz drüberschauen?
Bekomme folgende fehlermeldung :
Output:
Wenn mir jemand helfen kann, wäre das echt super. Steig da echt nicht mehr durch...
Kann mal jemand kurz drüberschauen?
Bekomme folgende fehlermeldung :
Code: Alles auswählen
MySQL error 1064: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near 'ARTLANG.online = '1' ORDER BY ARTLANG.lastmodified DESC limit 5
SELECT ARTLANG.idart, ARTLANG.idartlang, ARTLANG.lastmodified FROM con_cat_art AS CATART, con_art_lang AS ARTLANG WHERE CATART.idcat = '12' AND ARTLANG.idart = CATART.idart AND ARTLANG.idlang = '1' AND CATART.is_start = '0' ARTLANG.online = '1' ORDER BY ARTLANG.lastmodified DESC limit 55
[08-Aug-2005 19:42:29] next_record called with no query pending.
[08-Aug-2005 19:45:30] PHP Parse error: parse error in /xxx/xxx/xxx/xxx.de/httpdocs/test/wat/cms/front_content.php(567) : eval()'d code on line 438
Code: Alles auswählen
Hier mein Input:
/**
* CONTENIDO MODUL - INPUT
*
* Erweiterte Artikel liste Version 1.1 mit Seitenzählung
*
* Liste von Artikeln mit mehreren Daten basierend
* auf 4fb referenz modul
* 1.Gibt die Subheadline eines Artikel mit aus
* 2.Anschnitte nur nach ganzen Wörtern
* 3.Thumnails werden vernünftig berechnet
* 4.Image für Erzeugung von Thumbs kann gewählt werden
* Author : Evert Smit / Dirk Uptmoor / Peter Beauvain
* Copyright : None
* Created : 13-07-03
* Modified : 16-08-02 /20-09-03 upt /02-02-04 Beau/04-04-04 Beau
*/
// selected category
$selected = "CMS_VALUE[0]";
$seldir = "CMS_VALUE[9]";
$selimg = "CMS_VALUE[11]";
//funktion für die checkboxen
function d_checked($which) {
if ($which != "") {
return "checked";
}
} // end function
echo "<table cellspacing=\"0\" cellpadding=\"2\" border=\"0\">
<tr>
<td></td> <td></td><td width=\"120\">Anzahl Einträge/Seite: </td><td></td>
<td><input type=\"text\" name=\"CMS_VAR[8]\" value=\"CMS_VALUE[8]\"></td></tr>
<tr bgcolor=\"#E8E8EE\" valign=\"top\">
<td></td>
<td><input type=\"checkbox\" value=\"on\" ".d_checked("CMS_VALUE[14]")." name=\"CMS_VAR[14]\"></td>
<td width=\"120\">Ausgabe mit Startartikel</td>
<td></td>
<td>Kategorie wählen:<br>
<select name=\"CMS_VAR[0]\">";
if($selected!="0" && $selected!=""){
echo"<option value=\"0\">--- kein ---</option>";
}else{
echo"<option selected=\"selected\" value=\"0\">--- kein ---</option>";
}
// fetch all categorys
$query = "SELECT A.idcat, A.level, C.name FROM ".$cfg["tab"]["cat_tree"]." AS A, ".
$cfg["tab"]["cat"]." AS B, ".$cfg["tab"]["cat_lang"]." AS C WHERE A.idcat=B.idcat ".
"AND B.idcat=C.idcat AND C.idlang='$lang' AND B.idclient='$client' ".
"AND C.visible=1 ORDER BY A.idtree";
// execute query
$db->query($query);
// loop result and build the options
while ($db->next_record()) {
// indent spacer
$spaces = "|";
// how many levels
$levels = $db->f("level");
for ($i = 0; $i < $levels; $i ++) {
// add 2 spaces for every level
$spaces = $spaces . "--";
} // end for
$spaces .= ">";
if ($selected == $db->f("idcat")) {
// selected category
echo "<option selected=\"selected\" value=\"". $db->f("idcat") ."\">". $spaces . $db->f("name") ."</option>";
} else {
// category
echo "<option value=\"". $db->f("idcat") ."\">". $spaces . $db->f("name") ."</option>";
} // end if
} // end while
echo "</select>";
echo "</td>
<td></td>
</tr>
<tr valign=\"top\">
<td></td>
<td></td>
<td width=\"120\"></td>
<td></td>
<td>Überschrift: (wenn leer, keine Ausgabe)<br>
<input type=\"text\" name=\"CMS_VAR[2]\" value=\"CMS_VALUE[2]\" size=\"24\"></td>
</tr>
<tr bgcolor=\"#E8E8EE\" valign=\"top\">
<td></td>
<td> <input type=\"checkbox\" value=\"on\" ".d_checked("CMS_VALUE[4]")." name=\"CMS_VAR[4]\"> </td>
<td width=\"120\">Ausgabe der Artikel-Headline</td>
<td></td>
<td>Angezeigte Zeichen Artikel-Headline:<br>
<input type=\"text\" name=\"CMS_VAR[3]\" value=\"CMS_VALUE[3]\" size=\"24\"></td>
</tr>
<tr valign=\"top\">
<td></td>
<td><input type=\"checkbox\" value=\"on\" ".d_checked("CMS_VALUE[5]")." name=\"CMS_VAR[5]\"></td>
<td width=\"120\">Ausgabe der Artikel-Subheadline:</td>
<td></td>
<td>Angezeigte Zeichen Artikel-Subheadline:<br>
<input type=\"text\" name=\"CMS_VAR[6]\" value=\"CMS_VALUE[6]\" size=\"24\"></td>
</tr>
<tr bgcolor=\"#E8E8EE\" valign=\"top\">
<td></td>
<tr bgcolor=\"#E8E8EE\" valign=\"top\">
<td></td>
<td><input type=\"checkbox\" value=\"on\" ".d_checked("CMS_VALUE[7]")." name=\"CMS_VAR[7]\" ></td>
<td width=\"120\">Ausgabe der Thumbnails:</td>
<td></td>
<td>Bildcontainer für Thumbnail Quelle:<br>";
$db = new DB_Contenido;
$query = "SELECT output AS out, name AS beschreibung FROM ".$cfg["tab"]["mod"]." ";
$db->query($query);
echo"<select name=\"CMS_VAR[11]\">";
echo"<option value=\"kein\">-- kein --</option> ";
while ($db->next_record()) {
$frontendpath = $db->f("out");
$name = $db->f("beschreibung");
$rest = substr("$frontendpath", 3, 30);
$find = strpos($rest,"CMS_IMG");
if ($find === false) {
}
else {
$ok = substr($rest, $find, 10);
$nummer = substr($ok, 8, 1);
?>
<option value="<?php echo $nummer ?>"<?php if ($selimg == $nummer) echo " selected" ?>><?php echo $db->f("beschreibung") ?>
<?
}
}
echo" </option> </select> ";
echo"</td>
</tr>
<td></td><td></td>
<td width=\"120\">Thumbnail Ordner</td>
<td></td><td>Bitte wählen:<br><select name=\"CMS_VAR[9]\" size=\"1\">";
echo"<option value=\"kein\">-- kein --</option>";
$db = new DB_Contenido;
$query = "SELECT DISTINCT dirname FROM ".$cfg["tab"]["upl"]." ORDER BY dirname ASC";
$db->query($query);
while ($db->next_record()) {
?>
<option value="<?php echo $db->f("dirname") ?>"<?php if ($seldir == $db->f("dirname")) echo " selected" ?>><?php echo $db->f("dirname") ?></option>
<?php
}
echo "</select></td>
<tr valign=\"top\">
<td></td>
<td></td>
<td></td>
<td></td>
</tr>
</table>
"; //Ende
Output:
Code: Alles auswählen
<?
/***********************************************
* CONTENIDO MODUL - OUTPUT
*
* Erweiterte Artikel liste Version 1.1 mit Seitenzählung
*
* Liste von Artikeln mit mehreren Daten basierend
* auf 4fb referenz modul
* 1.Gibt die Subheadline eines Artikel mit aus
* 2.Anschnitte nur nach ganzen Wörtern
* 3.Thumnails werden vernünftig berechnet
* Author : Evert Smit / Dirk Uptmoor / Peter Beauvain
* Copyright : None
* Created : 13-07-03
* Modified : 16-08-02 /20-09-03 upt /31-01-04 Beau/04-04-04 Beau
************************************************/
switch ($eintrag) { // das erste mal beim aufruf ist $eintrag undefiniert
case "";
$eintrag = "0"; // deswegen wertzuweisung 0
}
//Frontendpfad ermitteln
$query = "SELECT frontendpath FROM ".$cfg["tab"]["clients"]." WHERE idclient='".$client."'";
$db->query($query);
$db->next_record();
$frontendpath = $db->f("frontendpath");
$zps = "CMS_VALUE[10]"; // Anzahl der Einträge
$max = ($eintrag + $zps);
$meineseite=$auth->url();
//------------- erstmal zählen wieviel Artikel vorhanden sind --------------------
$startarton = "AND CATART.is_start = '0'";
//soll der startartikel mit ausgegeben werden?.
$print_startartikel = "CMS_VALUE[14]";
if($print_startartikel !=""){
$startarton = "AND";
}
//die Überschrift wird ausgegeben wenn sie nicht leer ist.
$print_mainheadline = "CMS_VALUE[2]";
//soll headline ausgegeben werden?
$print_headline = "CMS_VALUE[4]";
//soll subheadline ausgegeben werden?
$print_subheadline = "CMS_VALUE[5]";
//soll ein thumnail ausgegeben werden?
$print_thumbnail = "CMS_VALUE[7]";
//thumbnail breite
$thumbnail_width = "CMS_VALUE[8]";
//wenn thumbnails = 0
$imagetag = "";
// second db class instance
$db2 = new DB_Contenido;
// selected category
$selcat = "CMS_VALUE[0]";
if($selcat!="0" && $selcat!=""){
// select all articles in category widthout start article
$query = "SELECT ARTLANG.idart, ARTLANG.idartlang, ARTLANG.lastmodified FROM ".$cfg["tab"]["cat_art"]." AS CATART, ".
$cfg["tab"]["art_lang"]." AS ARTLANG ".
"WHERE CATART.idcat = '$selcat' AND ARTLANG.idart = CATART.idart AND ARTLANG.idlang = '$lang' "." $startarton " ."ARTLANG.online = '1' ORDER BY ARTLANG.lastmodified DESC limit 55";
// execute query
$db->query($query);
unset($articleID);
unset($linkID);
// get id's of sub articles
while ($db->next_record()) {
$articleID[] = $db->f("idartlang");
$linkID[] = $db->f("idart");
} // end while
/****************** start table **************************/
echo '
<table border="0" borderstyle="dashed" cellpadding="1" cellspacing="2" width="500">
';
/**** Überschrift der Artikelliste wird ausgegeben, wenn nicht leer ********/
if($print_mainheadline !=""){
echo '
<tr>
<td bgcolor="#efefef" border="0" colspan="3" class="newsheadline"> CMS_VALUE[2] <br> </td>
</tr>
<tr>
<td height="5" class="text"> </td>
<td align="right" > </td>
</tr> ';
}
if($print_mainheadline ==""){
echo '
<tr>
<td colspan="2" class="newsheadline"> <br></td>
<td align="right"> </td>
</tr>
<tr>
<td bgcolor="#ffffff" class="text"> </td>
<td align="right" bgcolor="#ffffff"> </td>
</tr>
';
}
// Loop through articles
if (is_array($articleID)) {
foreach ($articleID as $key => $value) {
// select all CMS variables of the article
if($print_headline!="0" && $print_headline!=""){
$sql = "SELECT * FROM ".$cfg["tab"]["content"]." WHERE idartlang = '$value' AND idtype = '1' AND typeid = '1'";
$db->query($sql);
$db->next_record();
$headline = urldecode($db->f("value"));
for ($j=CMS_VALUE[3]; $j < CMS_VALUE[3]+20; $j++)
{
$headline1 = substr($headline , 0, $j);
$cut = substr($headline, $j);
if ((ord ($cut) == 32)||(ord ($cut) == 44)||(ord ($cut) == 45)) {
$headline= substr($headline , 0, $j);
$headline .= ' .....';
}
}
}
$cfgTab_art_lang = $cfg['tab']['art_lang'];
$cfgTab_content = $cfg['tab']['content'];
$sql = "SELECT A.author AS author, B.created AS lastmod FROM $cfgTab_art_lang AS A, $cfgTab_content AS B WHERE A.idart='$value' AND B.idartlang=A.idartlang ORDER BY B.created DESC";
$db->query($sql);$db->next_record();
$modifydate= date("d.m.y",strtotime($db->f("lastmod")));
$modifytime= date("H:i",strtotime($db->f("lastmod")));
if($print_subheadline!="0" && $print_subheadline!=""){
$sql_subheadline = "SELECT * FROM ".$cfg["tab"]["content"]." WHERE idartlang = '$value' AND idtype = '1' AND typeid = '2'";
$db->query($sql_subheadline);
$db->next_record();
$subheadline = urldecode($db->f("value"));
for ($i=CMS_VALUE[6]; $i < CMS_VALUE[6]+20; $i++)
{
$subheadline1 = substr($subheadline , 0, $i);
$cut = substr($subheadline, $i);
if ((ord ($cut) == 32)||(ord ($cut) == 44)||(ord ($cut) == 45)) {
$subheadline= substr($subheadline , 0, $i);
$subheadline .= ' .....';
}
}
}
/******************* begin thumbnails **********************************/
if($print_thumbnail !="0" && $print_thumbnail !=""){
// select and resolve image path
$imagesql="select value from ".$cfg["tab"]["content"]." where idartlang='$value' and idtype='4' and typeid='CMS_VALUE[11]'";
$db2->query($imagesql);
$db2->next_record();
$image_id= $db2->f("value");
// get image name and path
$imagesql="select * from ".$cfg["tab"]["upl"]." where idupl='$image_id'";
$db2->query($imagesql);
$db2->next_record();
$webdir='upload/';
$thumbdir='CMS_VALUE[9]';
$filedir=$frontendpath;
$imagelocation=$filedir.$webdir.$db2->f('dirname').$db2->f('filename');
$thumblocation=$filedir.$webdir.$thumbdir.$db2->f('filename');
if (!file_exists($thumblocation)){
// create thunbnail
$fileinformation=getimagesize($imagelocation);
$imagewidth = $fileinformation[0];
$imageheight = $fileinformation[1];
$imagetype=$db2->f('filetype');
$imageattributes = $fileinformation[3];
//$newfile= $last_id."-image.".$imagetype;
$target=$thumblocation;
if ( !(copy($imagelocation,$target)))
{
echo "Could not copy file to destintaion., Command returned Error Message. Please check your log files. ".$imagelocation." ".$target;
die;
}
//create thumbnails 80xrelational height; neu $thumbnail_width x proportionale Höhe
// Determine what filetype and set pointer to source image
$original_image=ImageCreateFromJPEG($target);
if (!$original_image){
echo 'Error getting image from '.$target.'.';
}
$palette_image =$filedir.$webdir.$thumbdir.'vorlage.jpg';
$thumbsize = getImageSize($palette_image);
$maxdim = $thumbsize[0];
$draw_from = $imagelocation;
$dim = GetImageSize($draw_from);
if($dim[0]>$dim[1])
{
$to_w = $maxdim;
$to_h = round($dim[1]*($maxdim/$dim[0]));
$to_x = 0;
$to_y = round($maxdim-$to_h)/2;
}
else
{
$to_h = $maxdim;
$to_w = round($dim[0]*($maxdim/$dim[1]));
$to_y = 0;
$to_x = round($maxdim-$to_w)/2;
}
if($dim[2]==1) {$from = ImageCreateFromGIF($draw_from);}
elseif($dim[2]==2) {$from = ImageCreateFromJPEG($draw_from);}
elseif($dim[2]==3) {$from = ImageCreateFromPNG($draw_from);}
$thumb = ImageCreateFromJPEG($palette_image);
// $set_bg_colour = ImageColorAllocate($thumb,255,0,0);
// $fill_bg_colour = ImageFill($thumb,0,0,$set_bg_colour);
imagecopyresampled($thumb, $from, $to_x, $to_y, 0,
0, $to_w, $to_h, $dim[0], $dim[1]);
//echo $target;
// set image width and height of thunbnail and put pointer for filesytsem
$thumbfile= $db2->f('filename');
$target_thumb=$thumblocation;
$t_width=$thumbnail_width;
// calculating height to maintain ratio
$t_height=($thumbnail_width/$imagewidth)*$imageheight;
// remove digits to get solid number
list ($t_height,$notimportand)=explode('.',$t_height);
// create blank image
$thumb_image=imagecreatetruecolor($t_width,$t_height);
// $thumb_image=imagecreate($t_width,$t_height);
// $thumb_image=ImageCreateFromJPEG($palette_image);
// resize image based on height and width
imagecopyresampled($thumb_image,$original_image,0,0,0,0,$t_width,$t_height,$imagewidth,$imageheight);
// store image on file system
// requires different functionf for either gif or jpeg
imagejpeg($thumb,$target_thumb);
imagedestroy($thumb);
imagedestroy($original_image);
}
$image=$webdir.$thumbdir.$db2->f('filename');
$imagetag="<img src=\" $image \" border=0>";
$image=$webdir.$thumbdir.$db2->f('filename');
//wenn Artikel kein Bild hat
if (!$db2->f('filename')){
$image=$webdir.$thumbdir.'vorlage.jpg';
}
//Ende
$imagetag="<img src=\" $image \" border=0>";
} // ende wenn keine thumbs gewünscht
/**************** Ende Thumbnails ***********************/
// link
$link = $sess->url("front_content.php?client=$client&lang=$lang&idcat=$selcat&idart=$linkID[$key]&m=$m&s=$s");
/***********************Anfang Tablezeile für Artikelliste**********************/
echo '
<tr>
<td colspan="3" class="trnews1" cellpadding="2" ><div align="center"></div></td>
</tr>
<tr>
<td colspan="3" class="trnews1" cellpadding="2" ><A HREF="'.$link.'">'.$headline.'</a></td>
</tr>
<tr>
<td width=\"$thumbnail_width\" align="left" bgcolor="#ffffff"><A HREF="'.$link.'">'.$imagetag.'</a></td>
<td colspan="2" valign="top" bgcolor="#ffffff" class="newstext">'.$subheadline.'</td>
</tr>
<tr>
<td align="left" bgcolor="#ffffff"><span class="trnews1"><img src="upload/design/date.gif" border="0" align="middle" valign"bottom"></span></td>
<td align="center" class="trnews2"><A HREF="'.$link.'">'.$modifydate.'</a></td>
<td valign="bottom"><a href="'.$link.'"><img src="images/pfeil.gif" border="0" align="right"></a></td>
</tr>
<tr><td bgcolor="#FFFFFF"><IMG SRC="upload/design/fueller.gif" WIDTH="1" HEIGHT="2"
BORDER="0"></td></tr> ';
} // end while
unset($headline);
unset($headline1);
unset($subheadline);
unset($subheadline1);
unset($thumb);
} // end foreach
} // end if (is_array)
echo '</table>';
/***********************ende Table**********************/
?>
Hallo im Einsatz ist folgende Artikellisten-Modifikation:
In den Beiträgen der vorliegenden Seiten zur Liste, habe ich gesehen, dass es wohl bei *.GIF Probleme gibt, wegen igrendwelchen Patentgeschichten, bzw. die darurch fehlende Unterstützung bei der Erstellung von den Thumbs, gibt es inzwischen eine Lösung hierzu?
Wäre doch toll wenn die Artikelliste ungeachtet des Bildformates GIF oder JPG funktionieren würde....
Code: Alles auswählen
/**
* CONTENIDO MODUL - INPUT
*
* Erweiterte Artikel liste Version 1.1 mit Seitenzählung
*
* Liste von Artikeln mit mehreren Daten basierend
* auf 4fb referenz modul
* 1.Gibt die Subheadline eines Artikel mit aus
* 2.Anschnitte nur nach ganzen Wörtern
* 3.Thumnails werden vernünftig berechnet
* 4.Image für Erzeugung von Thumbs kann gewählt werden
* Author : Evert Smit / Dirk Uptmoor / Peter Beauvain
* Copyright : None
* Created : 13-07-03
* Modified : 16-08-02 /20-09-03 upt /02-02-04 Beau/04-04-04 Beau
*/
Wäre doch toll wenn die Artikelliste ungeachtet des Bildformates GIF oder JPG funktionieren würde....
Mit freundlichen Grüßen
Jörg Knörchen
Meine Hobby-Webseite:
www.mein-foto-abc.de : contenido 4.6.15 - I love it! : www.yogie.de : www.bastelstun.de
Jörg Knörchen
Meine Hobby-Webseite:
www.mein-foto-abc.de : contenido 4.6.15 - I love it! : www.yogie.de : www.bastelstun.de
-
- Beiträge: 5478
- Registriert: Di 2. Mär 2004, 21:11
- Wohnort: Halchter, wo sonst? ;-)
- Kontaktdaten:
kurzer Fehler nach Erzeugung der Thumbnails
Das Modul läuft, bis auf eine kleine Kleinigkeit, hervorragend.
Nachdem ich diesen ganzen Thread durchgelesen habe, wurde zwar mein Problem einmal erwähnt, aber nicht beantwortet.
Nun noch einmal:
Wenn ich einen neuen Artikel erstelle und danach das erste Mal wieder auf die Übersichtsseite der Artikelliste gehe, wird das Thumbnail ja erstellt. Hierbei erhalte ich über der Artikelliste einen ERROR-Hinweis, ebenso im Logfile der Administration mit folgendem Inhalt:
Das Thumbnail wird trotzdem erzeugt und bei nächsten Besuchen erscheint diese ERROR-Meldung nicht mehr.
Was kann ich tun, dass diese ERROR-Meldung beim ersten Besuch (Erzeugung der Thumbs) unterbunden wird.
Die Seite meines Clienten ist:
Köngernheimer-Dalmatiner
Nachdem ich diesen ganzen Thread durchgelesen habe, wurde zwar mein Problem einmal erwähnt, aber nicht beantwortet.
Nun noch einmal:
Wenn ich einen neuen Artikel erstelle und danach das erste Mal wieder auf die Übersichtsseite der Artikelliste gehe, wird das Thumbnail ja erstellt. Hierbei erhalte ich über der Artikelliste einen ERROR-Hinweis, ebenso im Logfile der Administration mit folgendem Inhalt:
Code: Alles auswählen
[22-Aug-2005 21:43:33] PHP Warning: imagecreatetruecolor(): Invalid image dimensions in /homepages/33/d96200902/htdocs/contenidocms/front_content.php(558) : eval()'d code on line 735
[22-Aug-2005 21:43:33] PHP Warning: imagecopyresampled(): supplied argument is not a valid Image resource in /homepages/33/d96200902/htdocs/contenidocms/front_content.php(558) : eval()'d code on line 739
Was kann ich tun, dass diese ERROR-Meldung beim ersten Besuch (Erzeugung der Thumbs) unterbunden wird.
Die Seite meines Clienten ist:
Köngernheimer-Dalmatiner
Hallo Leute,
ich bin völlisch am verzweifeln am tun...
Nun habe ich das Modul von Snoopy übernehmen wollen und bekomme, wenn ich das Modul in der Kategorie konfigurieren will die Fehlermeldung:
Muss ich denn evtl. noch irgendwelche anderen Einstellungen machen ???
Wäre schön wenn mir gerade jemand helfen könnte...
Danke schonmal
Jörg
[/quote]
ich bin völlisch am verzweifeln am tun...
Nun habe ich das Modul von Snoopy übernehmen wollen und bekomme, wenn ich das Modul in der Kategorie konfigurieren will die Fehlermeldung:
Nun habe ich diesen "kilometer langen" Thread hier gelesen und festgestellt, dass Darth-Vader das selbe Problem hatte...[26-Aug-2005 08:05:32] PHP Parse error: parse error, unexpected ';' in /homepages/14/d41006292/htdocs/testdocs/contenido/includes/include.con_editcontent.php(571) : eval()'d code on line 912
Timos antwort ist zwar hilfreich - aber der Quelltext des Moduls ist schon entsprechend geändert... Und trotzdem erhalte ich diesen, irgendwie nix-sagenden, Fehler...timo hat geschrieben: im zweifelsfalle folgende Zeile verwenden:
Wenn CMS_VALUE[3] leer ist, würde nämlich folgendes herauskommen:Code: Alles auswählen
for ($j="CMS_VALUE[3]"; $j < "CMS_VALUE[3]"+20; $j++)
und das schluckt PHP nicht ganz.Code: Alles auswählen
for ($j=; $j < +20; $j++)
Muss ich denn evtl. noch irgendwelche anderen Einstellungen machen ???
Wäre schön wenn mir gerade jemand helfen könnte...
Danke schonmal
Jörg
[/quote]
Jörg Zimmermann
Köln Rondorf
Köln Rondorf
ICH HABS!!!
und
so is bei mir der error weg!
Code: Alles auswählen
for ($j="CMS_VALUE[3]"; $j < "CMS_VALUE[3]"+20; $j++)
{
$headline1 = substr($headline , 0, $j);
$cut = substr($headline, $j);
if ((ord ($cut) == 32)||(ord ($cut) == 44)||(ord ($cut) == 45)) {
$headline= substr($headline , 0, $j);
$headline .= ' .....';
}
}
}
Code: Alles auswählen
for ($i="CMS_VALUE[6]"; $i < "CMS_VALUE[6]"+20; $i++)
{
$subheadline1 = substr($subheadline , 0, $i);
$cut = substr($subheadline, $i);
if ((ord ($cut) == 32)||(ord ($cut) == 44)||(ord ($cut) == 45)) {
$subheadline= substr($subheadline , 0, $i);
$subheadline .= ' .....';
}
}
}
Leute, tut mir einen Gefallen. Bitte...Bitte...Bitte löscht diesen Thread. Ich versuche seit Tagen das Modul "Artikelliste mit Bild", das Anfangs von snoopy eingestellt wurde zu verwenden. Mittlerweile habe ich alle 16 Seiten durch und nichts läuft. Mal Fehlermeldung, mal weiße Seite..Nicht ein Modul in diesem Thread läuft. Ich komme mir echt verarscht vor.
Kann mir jemand ein lauffähiges Modul zuschicken. Es sollte das mit der vorlage.jpg im /thumb -Verzeichnis sein....oder was nutzt ihr.....???
Kann mir jemand ein lauffähiges Modul zuschicken. Es sollte das mit der vorlage.jpg im /thumb -Verzeichnis sein....oder was nutzt ihr.....???
Hi Gepo...
hier das Modul wie es bei mir funktioniert:
Input:
Output:
Dann hab ich im Ordner Upload den Ordner thumbnails erstellt und da die vorlage.jpg rein.
Das Modul ist allerdings schon an meine Bedürfnisse angepasst.
So wird z.B. bei mir die Überschrift statisch per Bild ausgegeben und nicht über das Modul generiert.
Aber die Passage kannste ja leicht ändern.
Bei mir läuft es so auf alle Fälle.
Input:
Code: Alles auswählen
/**
* Artikelliste
*
* Liste von Artikeln mit mehreren Daten basierend
* auf 4fb referenz modul
* 1.Gibt die Subheadline eines Artikel mit aus
* 2.Anschnitte nur nach ganzen Wörtern
* 3.Thumnails werden vernünftig berechnet
* 4.Image für Erzeugung von Thumbs kann gewählt werden
* Author : Evert Smit / Dirk Uptmoor / Peter Beauvain
* Copyright : None
* Created : 13-07-03
* Modified : 16-08-02 /20-09-03 upt /02-02-04 Beau
*/
// selected category
$selected = "CMS_VALUE[0]";
$seldir = "CMS_VALUE[9]";
$selimg = "CMS_VALUE[11]";
//funktion für die checkboxen
function d_checked($which) {
if ($which != "") {
return "checked";
}
} // end function
echo "<table cellspacing=\"0\" cellpadding=\"2\" border=\"0\">
<tr bgcolor=\"#E8E8EE\" valign=\"top\">
<td></td>
<td><input type=\"checkbox\" value=\"on\" ".d_checked("CMS_VALUE[14]")." name=\"CMS_VAR[14]\"></td>
<td width=\"120\">Ausgabe mit Startartikel</td>
<td></td>
<td>Kategorie wählen:<br>
<select name=\"CMS_VAR[0]\">";
if($selected!="0" && $selected!=""){
echo"<option value=\"0\">--- kein ---</option>";
}else{
echo"<option selected=\"selected\" value=\"0\">--- kein ---</option>";
}
// fetch all categorys
$query = "SELECT A.idcat, A.level, C.name FROM ".$cfg["tab"]["cat_tree"]." AS A, ".
$cfg["tab"]["cat"]." AS B, ".$cfg["tab"]["cat_lang"]." AS C WHERE A.idcat=B.idcat ".
"AND B.idcat=C.idcat AND C.idlang='$lang' AND B.idclient='$client' ".
"AND C.visible=1 ORDER BY A.idtree";
// execute query
$db->query($query);
// loop result and build the options
while ($db->next_record()) {
// indent spacer
$spaces = "|";
// how many levels
$levels = $db->f("level");
for ($i = 0; $i < $levels; $i ++) {
// add 2 spaces for every level
$spaces = $spaces . "--";
} // end for
$spaces .= ">";
if ($selected == $db->f("idcat")) {
// selected category
echo "<option selected=\"selected\" value=\"". $db->f("idcat") ."\">". $spaces . $db->f("name") ."</option>";
} else {
// category
echo "<option value=\"". $db->f("idcat") ."\">". $spaces . $db->f("name") ."</option>";
} // end if
} // end while
echo "</select>";
echo "</td>
<td></td>
</tr>
<tr valign=\"top\">
<td></td>
<td></td>
<td width=\"120\"></td>
<td></td>
<td>Überschrift: (wenn leer, keine Ausgabe)<br>
<input type=\"text\" name=\"CMS_VAR[2]\" value=\"CMS_VALUE[2]\" size=\"24\"></td>
</tr>
<tr bgcolor=\"#E8E8EE\" valign=\"top\">
<td></td>
<td> <input type=\"checkbox\" value=\"on\" ".d_checked("CMS_VALUE[4]")." name=\"CMS_VAR[4]\"> </td>
<td width=\"120\">Ausgabe der Artikel-Headline</td>
<td></td>
<td>Angezeigte Zeichen Artikel-Headline:<br>
<input type=\"text\" name=\"CMS_VAR[3]\" value=\"CMS_VALUE[3]\" size=\"24\"></td>
</tr>
<tr valign=\"top\">
<td></td>
<td><input type=\"checkbox\" value=\"on\" ".d_checked("CMS_VALUE[5]")." name=\"CMS_VAR[5]\"></td>
<td width=\"120\">Ausgabe der Artikel-Subheadline:</td>
<td></td>
<td>Angezeigte Zeichen Artikel-Subheadline:<br>
<input type=\"text\" name=\"CMS_VAR[6]\" value=\"CMS_VALUE[6]\" size=\"24\"></td>
</tr>
<tr bgcolor=\"#E8E8EE\" valign=\"top\">
<td></td>
<tr bgcolor=\"#E8E8EE\" valign=\"top\">
<td></td>
<td><input type=\"checkbox\" value=\"on\" ".d_checked("CMS_VALUE[7]")." name=\"CMS_VAR[7]\" ></td>
<td width=\"120\">Ausgabe der Thumbnails:</td>
<td></td>
<td>Bildcontainer für Thumbnail Quelle:<br>";
$db = new DB_Contenido;
$query = "SELECT output AS out, name AS beschreibung FROM ".$cfg["tab"]["mod"]." ";
$db->query($query);
echo"<select name=\"CMS_VAR[11]\">";
echo"<option value=\"kein\">-- kein --</option> ";
while ($db->next_record()) {
$frontendpath = $db->f("out");
$name = $db->f("beschreibung");
$rest = substr("$frontendpath", 3, 30);
$find = strpos($rest,"CMS_IMG");
if ($find === false) {
}
else {
$ok = substr($rest, $find, 10);
$nummer = substr($ok, 8, 1);
?>
<option value="<?php echo $nummer ?>"<?php if ($selimg == $nummer) echo " selected" ?>><?php echo $db->f("beschreibung") ?>
<?
}
}
echo" </option> </select> ";
echo"</td>
</tr>
<td></td><td></td>
<td width=\"120\">Thumbnail Ordner</td>
<td></td><td>Bitte wählen:<br><select name=\"CMS_VAR[9]\" size=\"1\">";
echo"<option value=\"kein\">-- kein --</option>";
$db = new DB_Contenido;
$query = "SELECT DISTINCT dirname FROM ".$cfg["tab"]["upl"]." ORDER BY dirname ASC";
$db->query($query);
while ($db->next_record()) {
?>
<option value="<?php echo $db->f("dirname") ?>"<?php if ($seldir == $db->f("dirname")) echo " selected" ?>><?php echo $db->f("dirname") ?></option>
<?php
}
echo "</select></td>
<tr valign=\"top\">
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
</tr>
</table>
"; //Ende
Code: Alles auswählen
<?
/***********************************************
* CONTENIDO MODUL - OUTPUT
*
* Erweiterte Artikel liste
*
* Liste von Artikeln mit mehreren Daten basierend
* auf 4fb referenz modul
* 1.Gibt die Subheadline eines Artikel mit aus
* 2.Anschnitte nur nach ganzen Wörtern
* 3.Thumnails werden vernünftig berechnet
* 4.Image für Erzeugung von Thumbs kann gewählt werden
* Author : Evert Smit / Dirk Uptmoor / Peter Beauvain
* Copyright : None
* Created : 13-07-03
* Modified : 16-08-02 /20-09-03 upt /02-02-04 Beau
************************************************/
//Frontendpfad ermitteln
$query = "SELECT frontendpath FROM ".$cfg["tab"]["clients"]." WHERE idclient='".$client."'";
$db->query($query);
$db->next_record();
$frontendpath = $db->f("frontendpath");
$startarton = "AND CATART.is_start = '0' AND";
//soll der startartikel mit ausgegeben werden?.
$print_startartikel = "CMS_VALUE[14]";
if($print_startartikel !=""){
$startarton = "AND";
}
//die Überschrift wird ausgegeben wenn sie nicht leer ist.
$print_mainheadline = "CMS_VALUE[2]";
//soll headline ausgegeben werden?
$print_headline = "CMS_VALUE[4]";
//soll subheadline ausgegeben werden?
$print_subheadline = "CMS_VALUE[5]";
//soll ein thumnail ausgegeben werden?
$print_thumbnail = "CMS_VALUE[7]";
//thumbnail breite
$thumbnail_width = "CMS_VALUE[8]";
//wenn thumbnails = 0
$imagetag = "";
// second db class instance
$db2 = new DB_Contenido;
// selected category
$selcat = "CMS_VALUE[0]";
if($selcat!="0" && $selcat!=""){
// select all articles in category widthout start article
$query = "SELECT ARTLANG.idart, ARTLANG.idartlang, ARTLANG.lastmodified FROM ".$cfg["tab"]["cat_art"]." AS CATART, ".
$cfg["tab"]["art_lang"]." AS ARTLANG ".
"WHERE CATART.idcat = '$selcat' AND ARTLANG.idart = CATART.idart AND ARTLANG.idlang = '$lang' "." $startarton " ."ARTLANG.online = '1' ORDER BY ARTLANG.lastmodified DESC limit 55";
// execute query
$db->query($query);
unset($articleID);
unset($linkID);
// get id's of sub articles
while ($db->next_record()) {
$articleID[] = $db->f("idartlang");
$linkID[] = $db->f("idart");
} // end while
/****************** start table **************************/
echo '
<table border="0" borderstyle="dashed" cellpadding="0" cellspacing="0" width="165"
';
/**** Überschrift der Artikelliste wird ausgegeben, wenn nicht leer ********/
if($print_mainheadline !=""){
echo '
<tr><td align="left" class="container"><img src="images/nav_button.jpg" border="0"></td>
<td class="container" valign="bottom"><img src="upload/logos/angebote.gif"border="0"></td>
</tr> ';
}
if($print_mainheadline ==""){
echo '
<tr>
<td class="container">Angebote</td>
</tr>
';
}
// Loop through articles
if (is_array($articleID)) {
foreach ($articleID as $key => $value) {
// select all CMS variables of the article
if($print_headline!="0" && $print_headline!=""){
$sql = "SELECT * FROM ".$cfg["tab"]["content"]." WHERE idartlang = '$value' AND idtype = '1' AND typeid = '1'";
$db->query($sql);
$db->next_record();
$headline = urldecode($db->f("value"));
for ($j="CMS_VALUE[3]"; $j < "CMS_VALUE[3]"+20; $j++)
{
$headline1 = substr($headline , 0, $j);
$cut = substr($headline, $j);
if ((ord ($cut) == 32)||(ord ($cut) == 44)||(ord ($cut) == 45)) {
$headline= substr($headline , 0, $j);
$headline .= ' .....';
}
}
}
$cfgTab_art_lang = $cfg['tab']['art_lang'];
$cfgTab_content = $cfg['tab']['content'];
$sql_date = "SELECT * FROM ".$cfg['tab']['art_lang']." WHERE idartlang='$value' ";
$db->query($sql_date);
$db->next_record();
$modifydate= date("d.m.y",strtotime($db->f("created")));
$modifytime= date("H:i",strtotime($db->f("created")));
if($print_subheadline!="0" && $print_subheadline!=""){
$sql_subheadline = "SELECT * FROM ".$cfg["tab"]["content"]." WHERE idartlang = '$value' AND idtype = '1' AND typeid = '2'";
$db->query($sql_subheadline);
$db->next_record();
$subheadline = urldecode($db->f("value"));
for ($i="CMS_VALUE[6]"; $i < "CMS_VALUE[6]"+20; $i++)
{
$subheadline1 = substr($subheadline , 0, $i);
$cut = substr($subheadline, $i);
if ((ord ($cut) == 32)||(ord ($cut) == 44)||(ord ($cut) == 45)) {
$subheadline= substr($subheadline , 0, $i);
$subheadline .= ' .....';
}
}
}
/******************* begin thumbnails **********************************/
if($print_thumbnail !="0" && $print_thumbnail !=""){
// select and resolve image path
$imagesql="select value from ".$cfg["tab"]["content"]." where idartlang='$value' and idtype='4' and typeid='CMS_VALUE[11]'";
$db2->query($imagesql);
$db2->next_record();
$image_id= $db2->f("value");
// get image name and path
$imagesql="select * from ".$cfg["tab"]["upl"]." where idupl='$image_id'";
$db2->query($imagesql);
$db2->next_record();
$webdir='upload/';
$thumbdir='CMS_VALUE[9]';
$filedir=$frontendpath;
$imagelocation=$filedir.$webdir.$db2->f('dirname').$db2->f('filename');
$thumblocation=$filedir.$webdir.$thumbdir.$db2->f('filename');
if (!file_exists($thumblocation)){
// create thunbnail
$fileinformation=getimagesize($imagelocation);
$imagewidth = $fileinformation[0];
$imageheight = $fileinformation[1];
$imagetype=$db2->f('filetype');
$imageattributes = $fileinformation[3];
//$newfile= $last_id."-image.".$imagetype;
$target=$thumblocation;
if ( !(copy($imagelocation,$target)))
{
echo "Could not copy file to destintaion., Command returned Error Message. Please check your log files. ".$imagelocation." ".$target;
die;
}
//create thumbnails 80xrelational height; neu $thumbnail_width x proportionale Höhe
// Determine what filetype and set pointer to source image
$original_image=ImageCreateFromJPEG($target);
if (!$original_image){
echo 'Error getting image from '.$target.'.';
}
$palette_image =$filedir.$webdir.$thumbdir.'vorlage.jpg';
$thumbsize = getImageSize($palette_image);
$maxdim = $thumbsize[0];
$draw_from = $imagelocation;
$dim = GetImageSize($draw_from);
if($dim[0]>$dim[1])
{
$to_w = $maxdim;
$to_h = round($dim[1]*($maxdim/$dim[0]));
$to_x = 0;
$to_y = round($maxdim-$to_h)/2;
}
else
{
$to_h = $maxdim;
$to_w = round($dim[0]*($maxdim/$dim[1]));
$to_y = 0;
$to_x = round($maxdim-$to_w)/2;
}
if($dim[2]==1) {$from = ImageCreateFromGIF($draw_from);}
elseif($dim[2]==2) {$from = ImageCreateFromJPEG($draw_from);}
elseif($dim[2]==3) {$from = ImageCreateFromPNG($draw_from);}
$thumb = ImageCreateFromJPEG($palette_image);
// $set_bg_colour = ImageColorAllocate($thumb,255,0,0);
// $fill_bg_colour = ImageFill($thumb,0,0,$set_bg_colour);
imagecopyresampled($thumb, $from, $to_x, $to_y, 0,
0, $to_w, $to_h, $dim[0], $dim[1]);
//echo $target;
// set image width and height of thunbnail and put pointer for filesytsem
$thumbfile= $db2->f('filename');
$target_thumb=$thumblocation;
$t_width=$thumbnail_width;
// calculating height to maintain ratio
$t_height=($thumbnail_width/$imagewidth)*$imageheight;
// remove digits to get solid number
list ($t_height,$notimportand)=explode('.',$t_height);
// create blank image
$thumb_image=imagecreatetruecolor($t_width,$t_height);
// $thumb_image=imagecreate($t_width,$t_height);
// $thumb_image=ImageCreateFromJPEG($palette_image);
// resize image based on height and width
imagecopyresampled($thumb_image,$original_image,0,0,0,0,$t_width,$t_height,$imagewidth,$imageheight);
// store image on file system
// requires different functionf for either gif or jpeg
imagejpeg($thumb,$target_thumb);
imagedestroy($thumb);
imagedestroy($original_image);
}
$image=$webdir.$thumbdir.$db2->f('filename');
$imagetag="<img src=\" $image \" border=0>";
$image=$webdir.$thumbdir.$db2->f('filename');
//wenn Artikel kein Bild hat
if (!$db2->f('filename')){
$image=$webdir.$thumbdir.'vorlage.jpg';
}
//Ende
$imagetag="<img src=\" $image \" border=0>";
} // ende wenn keine thumbs gewünscht
/**************** Ende Thumbnails ***********************/
// link
$link = $sess->url("front_content.php?client=$client&lang=$lang&idcat=$selcat&idart=$linkID[$key]&m=$m&s=$s");
/***********************Anfang Tablezeile für Artikelliste**********************/
echo '
<tr>
<td colspan="2" class="off" cellpadding="2" ><A HREF="'.$link.'">'.$headline.'</a></td>
</tr>
<tr>
<td width=\"$thumbnail_width\" align="left" bgcolor="#D4D8E5" colspan="2"><A HREF="'.$link.'">'.$imagetag.'</a></td></tr>
<tr><td colspan="2" valign="top" bgcolor="#D4D8E5" class="newstext">'.$subheadline.'</td></tr>
</tr>';
} // end while
unset($headline);
unset($headline1);
unset($subheadline);
unset($subheadline1);
unset($thumb);
} // end foreach
} // end if (is_array)
echo '</table>';
/***********************ende Table**********************/
?>
Das Modul ist allerdings schon an meine Bedürfnisse angepasst.
So wird z.B. bei mir die Überschrift statisch per Bild ausgegeben und nicht über das Modul generiert.
Aber die Passage kannste ja leicht ändern.
Bei mir läuft es so auf alle Fälle.
Hallo Lula, leider klappt dein Modul auch nicht. Bei ersten Aufruf schon, doch dann habe ich im Output eine kleine Änderung gemacht:
/****************** start table von Lula***********************/
echo '
<table border="0" borderstyle="dashed" cellpadding="0" cellspacing="0" width="165"
';
/****************** start table geändert**********************/
echo '
<table border="0" borderstyle="dashed" cellpadding="0" cellspacing="0" width="165">
';
Danach ging nichts mehr.
Wenn jemand Lust hat sich eine kleine Mark zu verdienen, kann er mich anmailen. Würde nach wie vor gerne eine "Artikelliste mit Bild" haben wollen....Ich lass die Finger von diesem Thread. Wie wäre es mit einem neuen Thread (für Dummies).
/****************** start table von Lula***********************/
echo '
<table border="0" borderstyle="dashed" cellpadding="0" cellspacing="0" width="165"
';
/****************** start table geändert**********************/
echo '
<table border="0" borderstyle="dashed" cellpadding="0" cellspacing="0" width="165">
';
Danach ging nichts mehr.
Wenn jemand Lust hat sich eine kleine Mark zu verdienen, kann er mich anmailen. Würde nach wie vor gerne eine "Artikelliste mit Bild" haben wollen....Ich lass die Finger von diesem Thread. Wie wäre es mit einem neuen Thread (für Dummies).
-
- Beiträge: 5478
- Registriert: Di 2. Mär 2004, 21:11
- Wohnort: Halchter, wo sonst? ;-)
- Kontaktdaten:
gepo, ich sehe bei dir keine andere Aenderung ausser der, dass der table-Tag geschlossen wurde, im Gegensatz zu Lulas Version, die du zitiert hast. Ich habe mir das Modul jetzt nicht angeschaut, ob evtl. der Tag woanders geschlossen wird, aber wenn die Version von Lula funktioniert (hat), wieso hast du den Output geaendert?